Hey there!
It is common to have Canon Error with any printer. However, it is important to know how to fix the problem. Learn how to resolve the issue and what causes it.
What’s Canon Error 1403?

If your Canon printer’s control panel displays a 1403 error message then the problem is most likely with the printer’s printer head. This error message indicates if the printer’s print head is not working properly or if one of the cartridges is damaged.
Incorrect installation of the printhead can sometimes cause the error message to appear on the ij start cannon printer. We will be discussing how to diagnose and fix this issue.
Canon printers enjoy the advantages of being a champion among most supported devices, for many reasons. Unexpected printing errors can happen, and Canon printers are no exception. This error message could also be caused by a damaged or missing print head.
If your printer is very old and you feel certain that the printhead is defective, it is best to have it replaced. If the printer isn’t too old, and the issue is not due to a damaged printhead, technical support can be contacted for Canon printers. They will provide the required assistance in resolving your Canon 1403 error.
Find out why your Canon printer isn’t printing and what you can do to fix it.
You May Also Read Our:- New Blog
Troubleshoot Canon Support Code 1403
We know that the print head is failing and the problem can sometimes be caused by a cartridge issue. You don’t have to be frustrated. There are simple steps that can fix the problem.
1. Turn off the printer’s power and then disconnect any cables.
2. After the door opens, close it and wait for the printer carriage and carriage to move to the corner. Then, remove ink cartridges and the print head zone.
3. Then, take the print head out of the printer.
4. Make sure to replace the ink cartridges and ensure that they are correctly unpacked and properly installed in your printer.
5. You can use old cartridges with cotton swabs to soak them in high-temperature water.
Then, clean it up to clean the ink cartridges and print head. You should also clean the contacts on most of the parts from both the inside and outside. This step should be repeated until you have a thorough clean up of all ink.
6. Once you have completed the steps, wait until the ink builds up is gone and then change your ink cartridges.
7. Put the print head and ink cartridges back in the printer. Before you insert the ink cartridges into the printer, make sure that the print head has been installed correctly.
Reset Canon Printer
After we have completed hardware troubleshooting, we need to check for software glitches. If the canon printer is not printing, then follow these steps to check the list.
Make sure that your canon printer does not go into offline mode when you are trying to fix an error.
If you still get the Canon 1403 error message after following the above steps, please reset the printer to its default settings then start the setup process.
After you have restored your settings, please uninstall the driver and delete the printer from the computer’s list.